Spectra Precision FOCUS 35 - Page 186

Chapter 5
Maintenance and Repair
Focus 30/35 Service Manual 5 - 56 P/N 79000035_SM, Version 1.5
Fig. 5-44 Disassemble Rear Panel, ACB and cables
4 Disassemble F1K
Board and Display.
A. Unscrew 4x EJOT
screws and 6x M2
screws and remove
the Pressure Frame.
B. Remove the
Display
Touchscreen.
C. Remove Gasket
Display.
D. Unscrew 4x EJOT
screws and remove
the F1K Board.
E. Remove Key pad
F1.
Use torque wrench
TORX T6.
Use torque wrench
TORX T6.
Item Performance Action Result Notes
A(6x T8)
B
C
D
E(4xEJOT)
Beeper
cable
ACB board
F1K board