Spectra Precision FOCUS 35 - Page 214

Chapter 5
Maintenance and Repair
Focus 30/35 Service Manual 5 - 84 P/N 79000035_SM, Version 1.5
Fig. 5-63 Unplug cables
5 Remove Coarse drive
V and Fine drive V.
A. Unhook the spring
see Fig. 5-64 on page
5-85 .
B. Remove the two
screws with washer.
C. Remove the two
screws with washer.
D. Remove the Fine
drive V.
E. Dismantle Coarse
drive V.
F. Don’t remove the
ball bearing out of
the alhidade.
100Ncm/
8.85lbfin
40Ncm/
3.54lbfin
Precondition: The
Fine drive V could not
be removed
according to
Item 3.
Torx T20 bit
Torx T8 bit
Attend the ball
bearing in the
alhidade, it takes the
axis of the Coarse
drive V.
Item Performance Action Result Notes
A
B
C
D