Spectra Precision FOCUS 35 - Page 218

Chapter 5
Maintenance and Repair
Focus 30/35 Service Manual 5 - 88 P/N 79000035_SM, Version 1.5
Fig. 5-67 Clamp the Tension gear
3 Mount Slip ring board
SRB.
Mount Slip ring board
in reverse order, see
Fig. 5-65 on page 5-86
and center the board to
the screws.
40Ncm/3.54Lbfin
4 Mount MCB board. Mount Main control
board, see page 5-42.
Position MCB to the
Slip ring board to
centre the slider
contacts to the
middle of their
tracks see Fig. 5-68
on page 5-89 .
Item Performance Action Result Notes
A
B
C
Clamping tool
Plier