Spectra Precision FOCUS 35 - Page 264

Chapter 6
Adjustment and Verification
Focus 30/35 Service Manual 6 - 10 P/N 79000035_SM, Version 1.5
6 Verify the test A. Select check
box,Verify HA/ VA
Collimation
Specification Test
B. Measure to infinite
collimator position in
Face 1and 2.
C. Measure to short
range collimator
position in Face 1and
2.
D. Check the result in
message box.
HA/VA
collimation
infinite is shown
HA/VA
collimation
short range is
shown
Tolerance:
<20cc
Difference (CHz
Diff, CV Diff)
between infinity
and short range
HA/VA
Collimation.
As shown in Program
status/ messages.
Item Performance Action Result Notes