Spectra Precision FOCUS 35 - Page 307

Chapter 6
Adjustment and Verification
P/N 79000035_SM, Version 1.5 6 - 53 Focus 30/35 Service Manual
3 Position Transmitter
beam to Front lens
prism.
A. Loosen the three
screws which are
holding the
Transmitter unit.
B. Position the beam
spot by shifting the
Transmitter unit.
C. Tighten the three
screws.
D. Remove the Screen
attachment and the
reticle illumination
tools.
60 Ncm /5,31
lbfin
Torx T8 bit
The spot has to be
positioned centred
without reflecting
arround the prism.
Fig. 6-38 Transmitter unit adjustment
Item Performance Description Result Notes
Vertical
Horizontal
A/C
Shifting of Transmitter unit