Spectra Precision FOCUS 35 - Page 355

Chapter 6
Adjustment and Verification
P/N 79000035_SM, Version 1.5 6 - 101 Focus 30/35 Service Manual
Fig. 6-82 Reference pixel determination
4 Tracker collimation
test.
A. Select
Tracker
collimation test
and
press Start button to
run the automatic
driven test.
B. Check the
Collimation result as
final test criteria.
The average of 3
automatic
running 2 face
measure cycles
in Autolock
mode is shown
as Tracker
collimation.
Tolerance:
C/I < 30” /
0,0083gon.
5 Exit software Push
Exit button..
Item Performance Action Result Notes