Spectra Precision FOCUS 35 - Page 411

Chapter 6
Adjustment and Verification
P/N 79000035_SM, Version 1.5 6 - 157 Focus 30/35 Service Manual
Fig. 6-119 Tilt sensor offset
Alternative perform the Tilt sensor offset with application
software
Survey Pro.
1 Start Tilt sensor zero
point
A. Disconnect the
instrument from
PASS, restart the
instrument and run
the test from
Survey
Pro
as shown on the
instruction.
Follow the
instructions in
the appeared
window.
Execute the operation
in
Survey Pro. The
corrections will be
stored as customer
value in the MCB
memory.
Item Performance Action Result Notes