Spectra Precision FOCUS 35 - Page 413

Chapter 6
Adjustment and Verification
P/N 79000035_SM, Version 1.5 6 - 159 Focus 30/35 Service Manual
Fig. 6-121 HA/VA collimation correction
Alternative perform the HA/VA Collimation with
application software
Survey Pro.
1 Start HA/VA
collimation
A. Disconnect the
instrument from
PASS, restart the
instrument and run
the test from
SurveyPro as shown
on the instruction.
Follow the
instructions in
the appearing
window.
Execute the operation
in
Survey Pro. The
corrections will be
stored as customer
value in the MCB
memory.
Item Performance Action Result Notes