Spectra Precision FOCUS 35 - Page 94

Chapter 4
Troubleshooting
Focus 30/35 Service Manual 4 - 8 P/N 79000035_SM, Version 1.5
2 Overwrite constants
to instrument.
A. Select Overwrite
constants from PC
to instrument from
Instrument data in
Analyze and
pressRun
Operation
.
B. Press
Next in the
module
Production
Data Update
.
C. Choose the
instrument data file
*.irep from your
file system. Open
the data file
pressing
Open.
D. Select single
sensors or
All from
the list and press
Next.
The instrument data
model, serial number
and FW package will
be shown on screen.
A Warning label
appears:Only update
the production data
of a satellite to
restore its factory
settings!Loading the
factory settings into
a different unit
might spoil its
settings!
The Instrument data
will be written to the
Instrument manager
and each satellite.
Please use allways a
well charged
battery writing data
to the instrument.
Please verify the
serial number
between instrument
label and choosen
data file!!!
After writing the
data to the
instrument, the
program response
with a status
message.
Item Performance Action Result Notes