Spectra SAM-3040D - Enable Intel AMT in the AMI BIOS

116
6
Intel AMT Settings
Enable Intel
®
AMT in the AMI BIOS
1. Power-on the system then press <Del> to enter the main menu of the AMI
BIOS.
2. In the Advanced menu, select AMT Conguration.
3. In the AMTeld,selectEnabled.
Enable or Disable Boot
Option for Legacy
Network Devices.
BIOS SETUP UTILITY
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
Legacy OpROM Support
Launch PXE OpROM
Launch Storage OpROM

PCI Subsystem Settings

Trusted Computing

PC Health Status

ACPI Power Management Conguration

CPU Conguration

SATA Conguration

Intel IGD SWSCI OpRegion

Intel TDT (AT-p) Congurations

Intel TXT(LT) Conguration

USB Conguration

Super IO Conguration

UART Conguration

Intelligent Power Sharing

AMT Conguration

Onboard ATA Controller Conguration

Serial Port Console Redirection
[Disabled]
[Enabled]
Save & ExitChipset Boot Security
Main
Advanced
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+/
-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit
AMT Help
BIOS SETUP UTILITY
Version 2.00.1201. Copyright (C) 2009 American Megatrends, Inc.
AMT
Uncongure AMT/ME
Advanced
[Enabled]
[Disabled]
→ ←: Select Screen
↑↓: Select Item
Enter: Select
+/
-:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save ESC: Exit