C
Troubleshooting
System Board
1. Make sure the add-in card is seated securely in the expansion slot. If the
add-in card is loose, power off the system, re-install the card and power up
the system.
2. Check the jumper settings to ensure that the jumpers are properly set.
3. Verify that all memory modules are seated securely into the memory sockets.
4. Make sure the memory modules are in the correct locations.
5. If the board fails to function, place the board on a at surface and seat all
socketed components. Gently press each component into the socket.
6. If you made changes to the BIOS settings, re-enter setup and load the BIOS
defaults.
Spectra (Schweiz) AG
Gewerbestr. 12a
CH-8132 Egg/ZH
Tel. +41 (0) 43 - 277 10 50
Fax +41 (0) 43 - 277 10 51
E-Mail info@spectra.ch
Web www.spectra.ch
Spectra Automatisierungstechnik GmbH
Gewerbepark Ost 1
A-4621 Sipbachzell (Wels)
Tel. +43 (0) 72 40 - 2 01 90
Fax +43 (0) 72 40 - 2 01 90 60
E-Mail info@spectra-austria.at
Web www.spectra-austria.at
Spectra Computersysteme GmbH
Mahdenstr. 3
D-72768 Reutlingen
Tel. +49 (0) 7121 - 14321 - 0
Fax +49 (0) 7121 - 14321 - 90
E-Mail spectra@spectra.de
Web www.spectra.de
Office West:
Tel. +49 (0) 21 04 - 94 83 07
Fax +49 (0) 21 04 - 94 83 08
www.spectra.de www.spectra.ch www.spectra-austria.at
Alle Marken-, Firmen- und Produktnamen, sind registrierte oder anderweitig geschützte Werke der jeweiligen Firmen/Inhaber.
Druckfehler, offensichtliche Irrtümer sowie Änderungen techn. Daten vorbehalten.
To Previous Page
Loading...