Spectra T950 - Page 20

Install the HAX Motor Prepare the HAX Motor for Installation
March 2015 HAX Motor Replacement—Spectra T950 Library
20
5. AssembletheHAXmotortensioningspringwiththewasherin
betweenthespringandthescrewhead.
6. PositiontheHAXmotorinstallationtoolagainsttheHAXmotor
mountingbracketsothatthenotchalignswiththeopeninginthe
standoff.
7. Insertthetensioningscrew,washer,andspringintothestandoffsothat
theHAXmotorinstallationtoolisclampedbetweenthespringandthe
standoff.
8. Usingyourthumb,pushinonthescrewtocompressthespringand
turnthescrewtoengageitwiththethreadsinthestandoff.
Figure 22 Ensure the HAX motor
tensioning screw is assembled as shown.
Figure 23 Start the tensioning spring screw.
Washer
Spring