Spectra T950 - Library Components; Front Panel Components

Complete the Replacement Reassemble the Left Most Frame
March 2015 HAX Motor Replacement—Spectra T950 Library
27
COMPLETE THE REPLACEMENT
AfteryouinstalltheHAXmotor,usetheproceduresinthefollowing
sectionstocompletethereplacement.
Reassemble the Left Most Frame
Thestepstoreassembletheleft‐mostframedependontheframetype.
 IftheframeisabulkTAPframe,beginwithInstalltheFan
AssemblyandBayCover(BulkTAPOnly)onthispage.
 Iftheframeisthemainframe,skiptoReinstalltheMediaShelves,
CableGuard,andMediaCov eronpage 29.
Install the Fan Assembly and Bay Cover (Bulk TAP Only)
1. Usinga#2Phillipsscrewdriver,installfourscrewstosecuretheHAX
motorbaycovertothefrontoftheframe.
Figure 31 Install the HAX motor bay cover.
Screws (4)
HAX motor
bay cover