Spectra T950 - Prepare the Left Frame

Prepare for the Replacement Prepare the Left Frame
March 2015 HAX Motor Replacement—Spectra T950 Library
11
Prepare the Left Frame
Usethefollowingstepstopreparetheleftmostframe.
1. Removethecoverfromthebottomfrontoftheframebyfirstpulling
firmlyoutwardonthebottomcenterofthepanel(A),andthenpulling
outwardonthehandleatthetopofthepanel( B).
2. Setthecoveraside.
3. Thenextstepdependsontheframetype.
 IftheframeisabulkTAPframe,continuewithRemovetheFan
AssemblyandHAXMotorBayCover(BulkTAPFrameOnly)on
page 12.
 Iftheframeisthemainframe,skiptoRemovetheFanAssembly
(MainFrame
Only)onpage 13.
Figure 11 Remove the filter cover.
B
A