SpectraLink 7622 - Page 103

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 103
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Old DECT servers and press Select.
5. If you want to define compatibility with CS1K (Communication Server 1000), press
Select, and then press Change to select On.
6. As default the handset always sends extended location information to old DECT
servers.
If you have issues with DECT subscription, you should turn off the extended location
registration, then the handset will not send extended location information to the DECT
server, and subscription should work.
To turn off extended location registration, scroll to Use extend location, press Select, and
then press Change to select No.
Handover Profile
You can define the handover profile to be either Normal, Fast or Rapid. Normal is the
standard and default value. Contact your system administrator for more information.
To Change Handover Profile
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Handover Profile, and press Select.
5. Scroll to the desired option, and press Change.
Local Tones
You can change the call progress tones (busy/dial/ringback tones) in your handset. Also if
you are in a different area, than the chosen call progress tone.
To Change Local Tone
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Local tones, and press Select.
5. Scroll to the desired option, and press Change.