SpectraLink 7622 - SAFE, Tear Off Cord and Alarm button

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 112
SAFE, Tear Off Cord and Alarm button
Note:
If a menu/submenu/setting/function is not visible, it is controlled by a local administrator.
Contact them, if a change is needed.
Workers can be at risk during security breaches or if personal incidents require immediate
attention. Personal monitoring is provided for:
• Alarm button
• Man down functionality, including “No movement” and "Not vertical" alarms
• "Running” alarms
• Tear Off cord
Caution:
The Tear Off Cord and SAFE applications are available through separate feature
licenses (Automatic Alarm Call | IP-DECT/DECT Servers
300/400/2500/6000/6500/8000) and may not be deployed in your facility. Contact your
system administrator for more information.
The Alarm button is located on the top of the handset. It provides an alarm and/or
instantaneous calling to any number speed-dial associated from the phonebook. This
number must first be added to the phonebook, then speed dial A associated to the name in
the phonebook. For more information, see "Adding a New Contact to the Phone Book" on
page 55 and "Adding a Number to Speed Dial" on page 57.
The emergency call feature can be programmed to work with both the Alarm button and the
motion sensors. It can be programmed to activate the loudspeaker if an emergency call is
placed. Motion applications can be programmed to place an emergency call if the alarm
state is triggered.
Alarm button and SAFE applications can be coupled with a security alarm application
program which can be programmed to receive the alarm and identify the handset, the user
and the location of the alarming handset along with other functionality.
The Tear Off Cord is located on the left side of the handset (only 7642).
The Tear Off Cord and SAFE applications can be coupled with a security alarm application
program which can be programmed to receive the alarm and identify the handset, the user
and the location of the alarming handset along with other functionality.
Contact your system administrator for full information about how personal safety applications
are deployed in your facility.