SpectraLink 7622 - How the SAFE Application Works

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 113
Warning: Not suitable for children
The reliability of the Spectralink Alarm button and SAFE application depends on the
functionality and reliability of the greater infrastructure – the wireless LAN, the LAN, the
call server, the central provisioning server, the server hosting location services, the
central security system and its servers, the correct configuration of the Spectralink
handsets, correct installation and configuration management server, and thorough
training of personnel.
How the SAFE Application Works
Three conditions of alerting can be activated and each is configurable by your administrator
according to the requirements of the facility. If not having the Automatic Alarm Call License
installed, the user cannot configure any of these settings. The user may be able to
temporarily suspend SAFE motion monitoring if the “snooze” feature is configured. If having
the Automatic Alarm Call License installed, the user can configure all the alarm settings.
If any of the SAFE motion conditions occur, the handset will first warn the user about an
impending alarm and if the user does not cancel the warning within a configurable number of
seconds the handset will start to alarm.
These are the SAFE motion conditions:
• Running – the handset detects shaking when a user runs for a configurable number
of seconds. If the warning is not canceled, an emergency call will be placed, if
configured.
• Not Vertical (Tilt) – the handset is not vertical for a configurable number of seconds.
If the warning is not canceled, an emergency call will be placed, if configured.
• No movement – the handset remains still for a configurable number of seconds,
potentially indicating the user is no longer moving. If the warning is not canceled, an
emergency call will be placed, if configured.
The SAFE motion conditions are configurable by sensitivity so depending on the sensitivity
level configured by the administrator, it may take very little motion/tilt/stillness to trigger a
warning or it may take a lot.
If an emergency call is placed, it preempts any active call which is ended by the application.