SpectraLink 7622 - Call Hold

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 41
Call Hold
Call Hold is a system dependent feature. When an active call is on hold, the icon is
shown in the display.
Call Hold
1. To place an active call on hold, press R.
2. To retrieve the call, press R.
If handset is subscribed to a SIP IPBX, you can also do the following:
1. To place an active call on hold, press Options, and press Select to select Hold.
2. To retrieve the call, press Resume.
Call Waiting
Call Waiting is a system dependent feature.
Call Waiting
• While on a call, press R to answer a second incoming call. The first call is
automatically put on hold.
• To reject a second incoming call, press left side of the navigation key for three
seconds.
• To disconnect the active call and return to the waiting call, press
.
• To end both calls, press
twice.
• To swap between two calls, press R.
If handset is subscribed to a SIP IPBX, you can also do the following:
• While on a call, press OK to answer a second incoming call. The first call is
automatically put on hold.
• To reject a second incoming call, press Reject.
• To disconnect the active call and return to the waiting call, press
.
• To end both calls, press
twice.
• To swap between two calls, press Options and select Swap calls or press R.
Call Forward Unconditional (CFU)
Call forward unconditional (CFU) is a system dependent feature.