SpectraLink 7622 - Turning Speakerphone On;Off; Turning Microphone Mute On;Off

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 42
Note:
The feature code for CFU is *21*$#. It is possible to change the code *21* on the
Spectralink IP-DECT/DECT Server to fit your standard. For more information, see the
relevant documentation available at https://support.spectralink.com/
To Enable CFU
1. To enable CFU press *21* followed by the desired number/extension and #, then
press
. Confirmation in display and a tone indicates that the feature has been
activated.
2. Press
to hang up. The status bar shows that CFU is activated.
To Disable CFU
1. To disable CFU, press #21#, then press .
2. Press
to hang up. Confirmation in display and a tone indicates that the feature
has been deactivated.
Turning Speakerphone On/Off
Turning speakerphone on allows other people in the room to listen to and participate in the
conversation. You may set the handset on a desk and leave your hands free.
To Turn Speakerphone On/Off
1. While in a call, press Options, scroll to Spkr. on to enable speakerphone.
2. To disable speakerphone, press Options, scroll to Spkr. off to disable
speakerphone.
3. Alternatively, pressing the left side of the navigation key during a call can enable
or disable the speakerphone.
Turning Microphone Mute On/Off
You can mute the microphone so that you can hear the other party, but they cannot hear
you.
To Turn Speakerphone On/Off
1. While on a call, press Mic Mute to turn microphone mute on.
2. To turn microphone mute off, press Mic on.