SpectraLink 7622 - Defining Alarm Settings

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 115
Activating the Tear Off Cord
The Tear Off Cord can be configured in different ways. Contact your system administrator to
find out which settings are active in your application.
Possible configurations include:
• Activation time
• Pre-alarm
• Sensitivity
Note:
The emergency call is ended by attaching the cord.
Defining Alarm Settings
To Change Alarm Settings for the Alarm Button
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Alarms, and press Select.
5. Scroll to Alarm key, and press Select.
6. Scroll to either Send MSF or Speed dial, and press Change.
If choosing Speed dial, you can also activate Loudspeaker.
Note:
If you have defined the Alarm button to work with Speed dial, A. empty is shown in the
Speed dial list in the Phone Book menu, and you can define a number to be dialed
when pressing the Alarm button.
To Change Alarm Settings for Tear Off Cord (only 7642)
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Alarms, and press Select.