Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 116
5. Scroll to Tear-off string, and press Select.
6. Scroll to either Send MSF or Speed dial, and press Change.
• If choosing either Send MSF or Speed dial, it is possible to activate use of
Pre alarm (pre alarm is the time interval, where it is possible to cancel the
alarm before the alarm is executed with MSF or call). Scroll to Pre alarm, and
press Change. The Pre alarm is defined to 10 sec. Using a third-party
application, it is possible to change the Pre alarm time.
• If choosing Speed dial, you can also activate Loudspeaker. Scroll to
Loudspeaker, and press Change.
To Disable Use of Tear off Cord (only 7642)
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Alarms, and press Select.
5. Scroll to Tear-off string, and press Select.
6. Scroll to Off, and press Change.
To Change Alarm Settings for Running Detector (only 7642)
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Alarms, and press Select.
5. Scroll to Running detector, and press Select.
6. Scroll to either Send MSF or Speed dial, and press Change.
• If choosing either Send MSF or Speed dial, it is possible to activate use of
Pre alarm (pre alarm is the time interval, where it is possible to cancel the
alarm before the alarm is executed with MSF or call). Scroll to Pre alarm, and
press Change. The Pre alarm is defined to 10 sec. Using a third party
application, it is possible to change the Pre alarm time.
• If choosing Speed dial, you can also activate Loudspeaker. Scroll to
Loudspeaker, and press Change.
To Next Page
Loading...
