SpectraLink 7622 - Page 24

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 24
Voice Mail
If you have a new voice mail message waiting, a blue envelope icon appears in the
display. The procedure for retrieving voice mail is system dependent. Contact your system
administrator for more information.
You can check your voice mails by long pressing key 1/
on the handset if you have
created the voice mail number as a contact in the phone book and assigned the voice mail
number to the speed dial key 1. For more information, see "Adding a New Contact to Phone
Book" on page 55 and "Adding Number to Speed Dial" on page 57.
Backlight
To save power the backlight can be set to automatically either dim or turn off. This will
happen after the handset has been idle for a configurable time delay.
The display backlight automatically turns on
again when e.g. an incoming call or message
arrives, or if a key is pressed.
The backlight turns off when handset is idle after a preset period of time delay.
The time delay can be adjusted between eight levels. The highest level will result in infinite
time delay, and the backlight will never dim or turn off. The other levels will dim with different
time delays.
The default delay setting is 5 seconds. The delay can be adjusted between 2 - 15 seconds.
Note:
Turning display backlight off when handset is idle will save battery power.
Setting Backlight to Automatically Dim or Turn Off
When setting display blacklight at dimmed, display information can still be seen vaguely
when handset is idle. If set to off, blacklight turns off.
1. Press Menu to enter main menu
2. Scroll to Settings, and press Select.
Appears in status bar when presence status is set to Do Not Disturb (system
dependent and only supported by Lync/Skype for Business).
Appears in status bar when presence status is set to Be Right Back (system
dependent and only supported by Lync/Skype for Business).
Appears in status bar when presence status is set to Appear Away (system
dependent and only supported by Lync/Skype for Business).
Appears in presence menu to reset status (system dependent and only supported
by Lync/Skype for Business).