SpectraLink 7622 - Page 29

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 29
To Enable/Disable Screen Lock and Set up PIN
You will be prompted to set up a PIN when enabling the screen lock feature the first time.
If using keypad lock, this is automatically disabled when enabling screen lock.
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Screen Lock, and press Select.
5. Press Change to select On or Off, and then press Save.
6. If a PIN is set up, confirm by entering the current PIN, and press OK.
7. If no PIN is set up, and screen lock is turned on/off, then you will be prompted to
enter a new PIN.
• Enter a PIN and press OK.
The maximum PIN length is 12 digits. Minimum PIN length is 4 digits (default
is 6 digits).
If you press Back, this will cancel the current operation.
• Repeat the PIN, and press OK.
8. Press OK again to return to Screen lock.
Note:
It is possible to change the PIN or disable the screen lock feature. It is also possible to
change the auto screen lock time. The default screen lock time delay is 3 minutes. The
auto screen lock time delay can be maximum 5 minutes. If the handset is locked, a lock
icon
appears in the display.
Note:
The maximum number of allowed attempts to unlock the handset is 250 (default is 3
attempts), but it is possible to define values between 1 and 250 attempts. Information
about attempts left, will only be shown when there are 10 attempts or less left before
the handset will lock itself.
If pressing an invalid PIN using the maximum defined attempts, then you must reset the
handset to factory settings and resubscribe the handset to the system. All information
will be lost. Unlocking the factory reset functionality requires a password.
When the handset is locked for further usage, you can still receive calls and make
emergency calls, if emergency numbers have been defined.
For more information, see “To Change PIN for Screen Lock” on page 107, ”To Change
Auto-Lock Time” on page 108, “To Change PIN Length” on page 108, “To Change
Screen Unlock Attempts” on page 108 and “To Reset to Factory Settings” on page 111.