SpectraLink 7622 - Page 78

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 78
4. Scroll to the desired ring tone, and press the right side of the navigation key to
listen to the ring tone. Repeat the process if you want listen to other ring tones.
5. Press the left side of the navigation key to listen to the internal calls ring tone
(system dependent feature).
6. Scroll to the desired ring tone, and press Change to select the new ring tone.
Note:
To listen to the ring tone, Silent mode must be set to off.
Volume
Adjust ringing volume according to the noise level of the surrounding environment.
To Adjust the Volume of the Ring Tone
1. Press Menu to enter main menu.
2. Scroll to Status, and press Select.
3. Scroll to Volume, and press Select.
4. Press the left or right side of navigation key to adjust the volume of the ring tone.
5. Press Set.
RSSI
This feature can be used to check the signal strength of the base stations and the signal
quality of the handset while in a call.
To Check RSSI Values
1. Press Menu to enter main menu.
2. Scroll to Status, and press Select.
3. Scroll to RSSI, and press Select. The bearer quality is shown in the display.
Survey
The survey function in the handset can be used for DECT installation and deployment and
for troubleshooting on existing DECT deployments.