SpectraLink 7622 - Page 96

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 96
Caution:
The Tear Off Cord and SAFE applications are available through separate feature
licenses (Automatic Alarm Call | IP-DECT/DECT Servers
300/400/2500/6000/6500/8000) and may not be deployed in your facility. Contact your
system administrator for more information.
For more information, see "SAFE, Tear Off Cord and Alarm button" on page 112.
Master Handset (System Dependent)
The Master handset feature is system dependent. Contact your system administrator for
more information.
To Replace a Handset using Master Handset (Spectralink DECT Server)
The handset must be registered as a Master handset. When using the handset as a Master
handset, it is possible to replace another handset by moving the directory number (e.g. local
number) from the handset to be replaced to the new handset.
1. Ensure that you have the new handset charged and ready for use. You do not need
the old handset.
2. Press Menu to enter main menu.
3. Scroll to Settings, and press Select.
4. Scroll to Advanced, and press Select.
5. Scroll to Master handset, and press Select.
6. Press OK to replace handset.
7. Enter the directory number of the handset to be replaced, and press OK.
8. Enter the IPEI of the new handset. For more information, see "To Check General
Information" on page 80.
9. Press OK to confirm the replacement. The data is updated automatically.
10. Press OK and subscribe the new handset. For more information, see "Login
(Subscription)" on page 98.
To Replace a Handset using Master Handset (Spectralink IP-DECT Server/Virtual
IP-DECT Server)
If registered as an admin rights user, the handset replacement can be done from the admin
rights user's handset in the Settings > Advanced > Master handset menu. If admin rights
are given when handset is in use, the handset must be turned off/on again for the Master