SpectraLink 7622 - Page 99

Spectralink 7622/7642 Handset User Guide
Spectralink 76-Series Handset User Guide.docx
April 2023 99
5. Scroll to Select Login, and press Select.
6. Scroll to the desired login, and press Select.
Removing a Login
Logins can be removed from the system in use and from the 14 other systems (if
connected). A password is required to remove a login. The default password is factory set at
0000.
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.
4. Scroll to Login, and press Select.
5. Scroll to Remove login, and press Select.
6. Scroll to the desired login, and press Select.
7. Enter your password, and press Ok.
8. If the system in use is removed, it is necessary to select one of the remaining
systems or to subscribe to a new one.
Creating a Login (Subscription)
To create a login, the system must allow subscriptions to be made. Some systems also
require an Authentication Code (AC). You can create a login by entering the ARI of the
system directly/manually or by performing a search for a system. If more than one system
currently permits subscription, you will need to know the ID of the system to which you want
to subscribe. Authentication Codes and system ID’s will be provided by the system
administrator.
You can subscribe up to 15 different systems, meaning that you can create 15 logins.
Note:
If the handset is already subscribed to 15 systems, you will have to remove a
subscription before creating a new one.
To Create Login by Searching for System
1. Press Menu to enter main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Advanced, and press Select.