BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK IP-DECT SERVER SERIES 20-BD5445-00
©
2019 BROADSOFT INC. PAGE 16 OF 49
BroadWorks Xtended Services Interface (Xsi) and BroadCloud IM&P Support Table
Interface Feature Supported Comments
after Placing Call on Hold
Perform Mid-Call Change to Call
Recording Mode
No
Record Local Three-Way Call No
Record Network Three-Way Call No
XMPP Features –
Contact/Buddy List
Contacts No
Favorites No
Groups No
Non-XMPP Contacts No
Conferences No
XMPP Features –
Presence
Login Invisible No
Presence State No
Presence Status No
Contact’s Presence State No
2.3 Known Issues
This section lists the known interoperability issues between BroadWorks and specific
partner release(s). Issues identified during interoperability testing and known issues
identified in the field are listed.
The following table provides a description of each issue and, where possible, identifies a
workaround. The verified partner device versions are listed with an “X” indicating that the
issue occurs in the specific release. The issues identified are device deficiencies or bugs,
and are typically not BroadWorks release dependent.
The Issue Number is a tracking number for the issue. If it is a Spectralink issue, the issue
number is from Spectralink’s tracking system. If it is a BroadWorks issue, the issue
number is from BroadSoft’s tracking system.
For more information on any issues related to the particular partner device release, see
the partner release notes.
Issue Number Issue Description Partner Version
PCS14A_
PCS18Ba
TBD INVITE failover time exceeded BroadWorks recommended
value.
DECT servers make 6 SIP request attempts prior to failover. The
total duration for the 6 SIP attempts and timeout typically lasts 10
to 20 seconds which exceeds the 6 seconds recommendation.
Workaround: None.
X X
To Next Page
Loading...
