SpectraLink IP-DECT 200 - System Capacity Overview

BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK IP-DECT SERVER SERIES 20-BD5445-00
©
2019 BROADSOFT INC. PAGE 24 OF 49
BroadWorks Device Management Interoperability Test Plan Support Table
Test Plan Package Test Plan Package Items Supported Comments
Client
Authentication
HTTPS Download with Client
Authentication Using XSP Cluster FQDN
No
Time Zone
Mapping
Inspect Time Zone Setting No
Language
Mapping
Inspect Language Setting No
File Inspection Inspect System Config File Yes
Inspect Device-Specific Config File Yes
Inspect Other Config Files Yes
Inspect Static Files Yes
Device Inspection Inspect SIP Settings Yes
Inspect Line Settings Yes
Inspect Service Settings No
HTTP File Upload HTTP Upload Using XSP IP Address No
HTTP Upload Using XSP FQDN No
HTTP Upload Using XSP Cluster FQDN No
Call Processing
Sanity Tests
Register with Authentication Yes
Call Origination Yes
Call Termination Yes
Remote Restart Yes
Shared Line Origination No
Shared Line Termination No
Shared Line Status No
Busy Lamp Field No
Network-Based Conference No
Flexible Seating Association via Voice Portal No
Association via Phone No
No Touch
Provisioning
Provision via DHCP Options Field Yes
No Touch Provision via DM redirect No
No Touch Provision via Vendor redirect No
5.2 Device Management Configuration
This section identifies the steps required to enable the Spectralink IP-DECT Server Series
for device management. For Device Management configuration details not covered here,
see the BroadWorks Device Management Configuration Guide [2] and the BroadWorks
CPE Kit Usage Guide [8].