SpectraLink IP-DECT 200 - Figure 14 Authentication Mode Set to MAC-Based and Sourced from Client Certificate

BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK IP-DECT SERVER SERIES 20-BD5445-00
©
2019 BROADSOFT INC. PAGE 43 OF 49
Figure 14 Authentication Mode Set to MAC-Based and Sourced from Client Certificate
5.3 Upgrade from Previous CPE Kits
The previous configuration sections are primarily structured around importing or manually
configuring the Spectralink device profile types for the first time. Many of the steps are
unnecessary when upgrading to a new firmware release or CPE kit version.
For general instructions on upgrading, see the BroadWorks CPE Kit Usage Guide [8].