SpectraLink IP-DECT 200 - Page 46

BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK IP-DECT SERVER SERIES 20-BD5445-00
©
2019 BROADSOFT INC. PAGE 46 OF 49
<sip>
<defaultdomain>%BWHOST-X%</defaultdomain>
<dnsmethod>dnssrv</dnsmethod>
<dtmf>
<rtp_payload_type>101</rtp_payload_type>
</dtmf>
<media>
<tos>%IP-DECT-SIP-MEDIA-TOS%</tos>
<vlan_cos>%IP-DECT-SIP-MEDIA-VLANCOS%</vlan_cos>
</media>
<proxy>
<domain>%SBC_ADDRESS%</domain>
</proxy>
<tos>%IP-DECT-SIP-TOS%</tos>
<transport>tcp</transport>
<vlan_cos>%IP-DECT-SIP-VLANCOS%</vlan_cos>
</sip>
<snmp>
<community>%IP-DECT-SNMP-COMMUNITY%</community>
<enable>%IP-DECT-SNMP-ENABLE%</enable>
<syscontact>%IP-DECT-SNMP-SYSCONTACT%</syscontact>
<syslocation>%IP-DECT-SNMP-SYSLOCATION%</syslocation>
<trapcommunity>%IP-DECT-SNMP-TRAPCOMMUNITY%</trapcommunity>
<traphost>%IP-DECT-SNMP-TRAPHOST%</traphost>
</snmp>
<suota>
<auto>%IP-DECT-SUOTA-AUTO%</auto>
<incharger>%IP-DECT-SUOTA-INCHARGER%</incharger>
<load>%IP-DECT-SUOTA-LOAD%</load>
<start_time>%IP-DECT-SUOTA-START-TIME%</start_time>
</suota>
</config>
Device-specific File: <MAC Address>-users.xml
NOTE: This is an example file and it should be used for reference only.
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<!-- BroadWorks Device Management configuration for Spectralink IP-DECT
Server -->
<!-- Device ID:"%BWFQDEVICEID%" Generated:"%BWTIMESTAMP%" -->
<users>
<user>
<standbytext>%BWFIRSTNAME-1%</standbytext>
<username>%BWLINEPORT-1%</username>
<displayname>%BWNAME-1%</displayname>
<authpassword>%BWAUTHPASSWORD-1%</authpassword>
<authuser>%BWAUTHUSER-1%</authuser>
</user>
<user>
<standbytext>%BWFIRSTNAME-2%</standbytext>
<username>%BWLINEPORT-2%</username>
<displayname>%BWNAME-2%</displayname>
<authpassword>%BWAUTHPASSWORD-2%</authpassword>
<authuser>%BWAUTHUSER-2%</authuser>
</user>
<user>
<standbytext>%BWFIRSTNAME-3%</standbytext>
<username>%BWLINEPORT-3%</username>
<displayname>%BWNAME-3%</displayname>