Thermo E 200 / 320 10 Packing / storage / shipping
1001
10 Packing / storage and shipping
10.1 General
The heater or its components, which are sent to Spheros
for inspection or repair, must be cleaned and packaged to
ensure that handling, transport and storage will not
damage them.
ATTENTION
If a complete heater is sent back, it must be completely
drained. Packaging and/or shipping must ensure that no
fuel or coolant can leak.
Coolant inlet and outlet fittings as well as the fuel lines
must be plugged and sealed using blank plugs.
The temperatures described in Chapter 2 may not be
exceeded during storage.
To Next Page
Loading...
