SPIDER MINI - Maintenance and Lubrication for Spider MINI

Operation manual – Spider MINI
35 / 53 rev. 02-01-10-2011
10. MAINTENANCE AND LUBRICATION
10.1. MOWER MAINTENANCE CHART
Period according to the counter
of operating hours (OH)
X = Operator
S = Authorised service centre
* = in dusty environment check more frequently
Daily or every 8 OH
After first 5 OH
Annually or every 50 OH
Annually or every 200 OH
Annually
Visually check for oil leakage from engine and hydraulic systems
x
Check tyre pressure
x
Visually check the tension of drive V-belt
x
Visually check the tension of drive and steering chains
x
Check mower battery voltage
x
Check electronic and safety devices (emergency stop, steering,
transmitter signal etc.)
x
Check bolts and nuts tightening (visually check daily)
x
x
Check blade sharpness and deformation
x
Check blade bolts tightening
x
Visually check hydraulic hoses, fuel hoses, cables – replace if
necessary
x
Check and adjust wheel geometry
x
Adjust the neutral position of the machine drive (hydraulic pump)
s
s
Change hydraulic oil and filter
s
s
Check and adjust wheel housing, add oil
s
s
Check blade deceleration time
s
s
Check drive belt, replace if necessary
x
Check and clean the mowing blade clutch
x
Check safety labels
x
Check bearings of the mowing device
s
s
Change engine oil
x
x
Change engine oil filter
x
Check engine oil level
x
x
Clean engine cooling system, exhaust cover, alternator, starter,
hydraulic system and controllers
x
Clean air filter and rough air filter
x *
Change air filter and rough air filter
x *
Change spark plugs
x
Change fuel and breather filters, clean the fuel tank
x *
Check valve clearance, adjust if necessary
s