SPIDER MINI - Cleaning the Machine; Torque Chart; Oil Viscosity

Operation manual – Spider MINI
46 / 53 rev. 02-01-10-2011
10.19. CLEANING THE MACHINE
Machine cleaning by high pressure water is not recommended. Pressurized water may penetrate inside
electrical parts, carburettor, air filter and cause malfunction. Wipe other parts with tissue or brush. Do not use
gasoline or other oil products for cleaning.
The mower deck should be thoroughly cleaned after every use, especially the inner walls of the bottom part of
the mower deck. For cleaning use a scraper. Secure the mower against undesired movement when cleaning.
During cleaning also check the condition of the blade.
Proper maintenance and treatment of the mower deck increases the quality of work and service life of your
mower. After cleaning and drying conserve the scratched parts with a protective paint, especially if you do not
intend to use the mower for a longer time.
If the mower is lifted during cleaning, secure it against falling and movement, remove the spark plug
terminal and press the EMERGENCY STOP button on the mower.
.
10.20. TORQUE CHART
Connection bolt
M6 (8.8)
M6 (10.9)
M 8
M 10
M 12
Tightening torque /Nm/
10
15
25
50
85
10.21. OIL VISCOSITY
Oil requirement may differ according to the use in different seasons or climatic zones. The following chart shows
the SAE values:
.
Chart of SAE oil grades according to external temperatures.
Recommended oils:
SAE 30, SAE 10W-30 API classification SF or higher