Operation manual – Spider MINI
44 / 53 rev. 02-01-10-2011
10.15. CHANGING THE WHEEL
Change the wheels on a level, firm surface
Turn the wheel so that the tightening nuts are accessible from the outside
Stop the engine, remove the key from the ignition
Secure the machine against movement.
Lift the mower and support it under the mower deck
Ensure the machine safe & supported before working on it.
Loosen the wheel nuts, remove the wheel
After repairing it, attach the wheel back in the reversed order.
Use suitable tools to unscrew the nuts
10.16. TYRE PRESSURE
Make sure that the tyres are always inflated to specified tyre pressure. Other values may unfavourably influence
the driving characteristics of the mower, especially on slopes. You may even lose control over the mower..
Specified tyre pressure: 200 kPa / 2 bar / 28 PSI
Maximum tyre pressure according to the tyre manufacturer: 220 kPa / 2,2 bar / 30 PSI
10.17. HEIGHT OF CUT ADJUSTMENT MECHANISM
Keep the sliding bars and height adjustment lever clean, undamaged and without excessive clearance. Adhere
to the lubrication schedule for pivots and sliding parts of the mower height adjustment system.
To Next Page
Loading...
