SRAM RockShox SIDLuxe Select+ 2P User Manual

32
Bottomless Tuning
Bottomless Tuning
Bottomless Tokens reduce air volume in your rear shock and create
greater progression at the end of the shock's travel. Add or remove
Tokens to tune your shock's bottomless feel.
Bottomless Tokens (1) 1 Token or (1) 2 Token max
Bottomless Token Installation:Bottomless Token Installation: Clamp the damper body eyelet into the Clamp the damper body eyelet into the
vise. vise.
Align the set screw openings on the Token and the seal head/air Align the set screw openings on the Token and the seal head/air
piston, then slide the Token onto the seal head/air piston. Install the set piston, then slide the Token onto the seal head/air piston. Install the set
screw and tighten. screw and tighten.
Token Removal:Token Removal: Clamp the damper body eyelet into the vise. Clamp the damper body eyelet into the vise.
Loosen and remove the Token set screw, then remove the Token from Loosen and remove the Token set screw, then remove the Token from
the shaft.the shaft.
1 Token 2 Token
Bottomless Token 2 mm 0.4 N·m (3.5 in-lb)
2 mm Bottomless Token

SRAM RockShox SIDLuxe Select+ 2P Specifications

General

Brand	SRAM
Model	RockShox SIDLuxe Select+ 2P
Category	Bicycle Accessories
Language	English