UM1659 Rev 4 5/25
UM1659 Overview and naming convention
24
1 Overview and naming convention
This document will help you to configure and install the hardware and software tools
necessary to operate the SPC5-UDESTK starter kit version.
At the end of the instructions described in this document, you will have a running
environment that could be used as a starting point for further development or evaluation
work.
This tutorial goes step-by-step through the necessary procedures in order to:
Install the SPC5-UDESTK starter kit version
Configure the SPC5 board and connect it to the host PC
Set up a project
Debug a sample application.
Note: If you need more information about the SPC5-UDESTK, please contact your nearest
STMicroelectronics sale’s office. Contact information is available on STMicroelectronics
website: http://www.st.com/web/en/support/online_tech_support.html.
1.1 Feedback
The SPC5-UDESTK starter kit version is part of the SPC5 MCU’ s family tool chain based
on the ST SPC5 Studio Integrated Development Environment.
Regarding any comments about SPC5-UDESTK use the website
http://www.st.com/web/en/support/online_tech_support.html
You are invited to browse to the PLS Development Tools’ website at http://www.pls-mc.com
to get latest information about the professional and full version of Universal Debug Version
(UDE).
The PLS Development Tools company welcomes feedback on products and
documentations. If you have any comments, suggestions or improvements about the
products you are using, please use the Feedback Form from website http://www.pls-
mc.com, send an email to sales@pls-mc.com.
To Next Page
Loading...
