UM1467 Using MDK-ARM Microcontroller Development Kit by Keil™
Doc ID 022172 Rev 1 20/46
7 Using MDK-ARM Microcontroller Development Kit by
Keil™
7.1 Building an existing MDK-ARM project
Follow these steps to build an existing MDK-ARM project.
1. Open the MDK-ARM µVision4 IDE, debugger, and simulation environment.
Figure 22: MDK-ARM µVision4 IDE environment shows the basic names of the
windows referred to in this section.
Figure 22. MDK-ARM µVision4 IDE environment
2. In the Project menu, select Open Project... to display the Select Project File dialog
box. Browse to select the STM32F4-Discovery.uvproj project file and click Open to
launch it in the Project window.
3. In the Project menu, select Rebuild all target files to compile your project.
To Next Page
Loading...
