ST STM32F4DISCOVERY - Debugging and Running Your MDK-ARM Project

Using MDK-ARM Microcontroller Development Kit by Keil™ UM1467
21/46 Doc ID 022172 Rev 1
4. If your project is successfully compiled, the following Build Output window (Figure 23:
Build Output - MDK-ARM µVision4 project successfully compiled) is displayed.
Figure 23. Build Output - MDK-ARM µVision4 project successfully compiled
7.2 Debugging and running your MDK-ARM project
In the MDK-ARM µVision4 IDE, click the magnifying glass to program the Flash memory
and begin debugging as shown below in Figure 24.
Figure 24. Starting a MDK-ARM µVision4 debugging session