9.2.4 Product identification DK32H7B3I$AT4
This product identification is based on the MB1332-H7B3I-C02 board.
It embeds the STM32H7B3LIH6Q microcontroller with silicon revision code "Z". The limitations of this silicon
revision are detailed in the errata sheet STM32H7A3xI/G, STM32H7B0xB and STM32H7B3xI device errata
(ES0478).
Product limitations
No limitation identified for this product identification.
9.3
Board revision history
9.3.1 Board MB1332 revision B-02
The revision B-02 is the initial release of the MB1332 mother board.
Board limitations
The P1 STMod+ connector on the bottom side of the main board does not allow a full plug of the MB1280 fanout
board.
9.3.2 Board MB1332 revision C-01
The P1 STMod+ connector is moved to the top side.
Board limitations
No limitation identified for this board revision.
9.3.3 Board MB1332 revision C-02
The revision C-02 of the MB1332 board replaces some part references.
Board limitations
No limitation identified for this board revision.
9.3.4 Board MB1315 revision A-01
The revision A-01 is the initial release of the MB1315 LCD daughterboard.
Board limitations
No limitation identified for this board revision.
9.3.5 Board MB1315 revision A-02
The revision A-02 of the MB1315 board replaces some part references.
Board limitations
No limitation identified for this board revision.
9.3.6 Board MB1486 revision A-02
The revision A-02 is the initial release of the MB1486 Wi‑Fi
®
daughterboard.
Board limitations
No limitation identified for this board revision.
9.3.7 Board MB1486 revision A-03
The revision A-03 of the MB1486 board replaces some part references.
UM2569
Board revision history
UM2569 - Rev 6
page 36/53