27
6. Transfer Pump Liner (Fig. 3.5) – Inspect
the inside diameter of the transfer pump liner
for unusually heavy scoring.
7. Drive Shaft (Fig. 3.6) – Handle the drive
shaft as you would a distributor rotor to prevent
damage. Inspect the shoe slots for excessive
wear, nicks or chips at the edges. Replace the
rollpin if damaged or missing. Inspect the area
where the drive shaft seals ride. Wear bands in
these areas are considered normal and do not
warrant shaft replacement. Inspect the transfer
pump drive key slot for wear.
Fig. 3.5
Fig. 3.6
To Next Page
Loading...
