Stanhope-Seta 30000-0 - User Manual

Stanhope-Seta 30000-0

44 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Pubn No: 30000H0K

Installation, Operating and Maintenance Instructions

SETAFLASH SERIES 3

CLOSED CUP

FLASH POINT TESTER

Model 30000-0

(Software Version 2.00 and above)

London Street, Chertsey, Surrey, KT16 8AP

Telephone: +44 (0) 1932 564391 Facsimile: +44 (0) 1932 568363

Email: info@stanhope-seta.co.uk Web: www.stanhope-seta.co.uk

Issue K

10 Jun 2007

Table of Contents

Safety Notices2
Preliminary Material3
- Purpose of this Manual3
- Equipment Identification3
  - Figure 1 30000-0 Setaflash Series 3 Closed Cup Flash Point Tester3
  - Table of Contents4
Contents4
List of Figures5
1 Conformity6
- Applications6
- Quality Assurance6
- Regulatory Conformance6
2 Description7
- Series 3 Flash Point Testers7
- Overview - Model 30000-07
- Figure 2 Main Component Parts7
- Safety Features8
  - Over-Temperature Cut-Out and Reset Button8
  - Temperature Warning Led8
3 Installation - General9
- Unpacking9
- Location9
- Power Supply Connections9
  - Mains Supply Operation9
  - Supply Operation (with Optional 30005-0 Psu)10
- Gas Supply10
4 Operation12
- Sample Preparation12
- Instrument Preparation12
- Setting Test Parameters15
  - Setting the Timer15
  - Setting the Temperature16
- Running a Test17
- Results19
  - Flash19
  - No Flash20
- End of Test20
5 Calibration22
- Description22
- Schedule22
- Procedure22
- Calibration Check25
6 Verification28
7 Maintenance29
8 Fault Finding30
9 Repair31
- Replacing a Flash Detector Probe31
- Replacing the "O" Ring Seal31
- Figure 4 Flash Detector Probe Replacement31
- Replacing the Gas Canister and Tubing32
- Figure 5 Sample Well 'O' Ring Seal Replacement32
- Figure 6 Gas Canister Replacement32
- Replacing the Lid/Shutter Assembly33
- Figure 7 Lid/Shutter Assembly Replacement33
10 Specification34
11 Accessories35
12 Spares36
- Spares Available36
- Suggested Spares for 2 Years (2000 Tests)36
13 Frequently Asked Questions37
- Figure 8 30000-0 Wiring Schematic Diagram38
Appendix A: Seta Coolant Module 13870-039
Appendix B: Seta Solids Dispenser 13747-041
Appendix C: Seta Cooling Block 13880-043

Need help?

Do you have a question about the Stanhope-Seta 30000-0 and is the answer not in the manual?

Summary

SAFETY NOTICES

2. DESCRIPTION

2.3. SAFETY FEATURES

Highlights safety mechanisms like over-temperature cut-out and warning LEDs.

3. INSTALLATION - GENERAL

3.3. POWER SUPPLY CONNECTIONS

Details on connecting the instrument to mains or 12Vdc power supplies.

3.4. GAS SUPPLY

Information on the butane gas canister, its function, and safety precautions.

4. OPERATION

4.1. SAMPLE PREPARATION

Guidelines for preparing samples, including storage and fill level.

4.2. INSTRUMENT PREPARATION

Steps to prepare the instrument before testing, including checks and settings.

4.3. SETTING TEST PARAMETERS

4.4. RUNNING A TEST

Step-by-step guide on how to perform a flash point test.

4.5. RESULTS

5. CALIBRATION

5.3. PROCEDURE

Step-by-step instructions for calibrating the instrument's temperature measurement.

5.4. CALIBRATION CHECK

Guide on how to verify the calibration after performing the procedure.

6. VERIFICATION

7. MAINTENANCE

8. FAULT FINDING

9. REPAIR

9.1. REPLACING A FLASH DETECTOR PROBE

9.3. REPLACING THE GAS CANISTER AND TUBING

9.4. REPLACING THE LID;SHUTTER ASSEMBLY

10. SPECIFICATION

13. FREQUENTLY ASKED QUESTIONS

Stanhope-Seta 30000-0 Specifications

General

Category	Test Equipment
Temperature Resolution	0.1°C
Resolution	0.1°C
Display	Digital
Type	Flash Point Tester
Standard	ASTM D93, ISO 2719
Model	Stanhope-Seta 30000-0