Stanhope-Seta 30000-0 - No Flash; End of Test

Pubn No: 30000H0K
4.5.2. NO FLASH
If a flash is NOT detected …..
….. the second line of the
display will not show “FLASH”.
XX.X
o
C TT mins
XX.X
o
C AUTO Yml
XX.X
o
C
RAMPING
Record the temperature and
result.
4.6. END OF TEST
Slide Down
Switch the gas supply OFF and
wait until the test and pilot
flames are extinguished.
Press then release the Set
Temperature Button
to reset
the Flash Detector and
temperature display.
Press & Release
Issue K
10 Jun 2007
20