Stanley 204143 - General Description; Intended Use; Applicability; Precautions

GENERAL DESCRIPTION
Intended Use
This manual provides abbreviated descripve informaon, wiring instrucons, and tune-in instrucons for the
iQ controller used with Magic-Swing™ and Magic-Force™. The manual is intended as a quick-reference guide.
Aachment 7 illustrates the iQ controller controls and indicators.
Applicability
This manual is applicable on iQ control boxes used with Magic-Swing and Magic-Force operators.
Precautions
Magic-Touch Hold Open Time must be a minimum of 3 seconds to ensure compliance with ANSI/BHMA 156.19 “American
Naonal Standard for Power Assist and Low Energy Power Operated Doors,” or most current ANSI/BHMA standards
specicaons.
All ANSI/BHMA and UL Requirements in Aachment 8 must be met before the door is put into operaon.
1
Copyright 2019, Stanley Access Technologies, LLC. . All rights reserved. Reproduction
in whole or in part without the express written permission of Stanley is prohibited.
10.18.2019
2 Document 204143 REV 5 • www.stanleyaccess.com • 1.800.7.ACCESS
Table of Contents
General Description ..........................................................................................................................2
Intended Use ..............................................................................................................................................................2
Applicability ................................................................................................................................................................ 2
Precautions.................................................................................................................................................................. 2
Features and Functions .......................................................................................................................................... 3
Wiring Instructions ...........................................................................................................................6
Evaluate Power Requirements ............................................................................................................................. 6
Connecting Main Power Wiring .......................................................................................................................... 6
Connecting Breakout Status Signal Wiring (Magic-Swing Operators) ................................................ 6
Connecting Breakout Status Signal Wiring (Magic-Force Operators) ................................................. 8
Wiring the Operator Switch Module (Magic-Force Operators) .............................................................. 9
Wiring the Operator for Required Handing (Magic-Force Operators) ..............................................10
Wiring the Power Close Speed Module ........................................................................................................10
Wiring the “ON/OFF/HOLD OPEN” Switch and Power Switch ..............................................................10
Wiring the Door Activation or Safety Device ...............................................................................................10
Wiring Swing Guard T ...........................................................................................................................................11
Wiring Bodyguard-T ..............................................................................................................................................11
Wiring Superscan-T ...............................................................................................................................................11
Wiring Holding Beam............................................................................................................................................11
Wiring Other Sensors ............................................................................................................................................11
Tune-In Instructions ........................................................................................................................ 12
Tuning in the iQ Using the Controller Pushbuttons .................................................................................12
Index Tables ..............................................................................................................................................................13
Status Codes .............................................................................................................................................................17
Door States................................................................................................................................................................18
Final Tune-In Adjustments ..................................................................................................................................19
Attachments ....................................................................................................................................20
Attachment 1: Breakout Status Wiring for Magic Swing Operators ............................. 20
Attachment 2: Magic-Force Wiring Diagram .....................................................................................21
Attachment 3: Magic-Swing Wiring Diagram ....................................................................................22
Attachment 4: Monitored Sensor Wiring Diagrams .......................................................................23
Attachment 5: Non-Monitored Sensors Wiring Diagram ...........................................................37
Attachment 6: iQ Terminal Block Connections ..................................................................................40
Attachment 7: iQ Controls and Indicators ...........................................................................................41
Attachment 8: ANSI/BHMA and UL Compliance Requirements ..............................................43
Attachment 9: Hand Held Device Troubleshooting Aid ...............................................................45
Attachment 10: Recommended Values for Door Configurations ...........................................46
Attachment 11: iQ Controller Fine Tuning ...........................................................................................47