Stanley 204143 - Attachment 4: Monitored Sensors Wiring Diagrams (Sheet 2 of 14)

iQ Control Box
24 Document # 204143 REV 5 • www.stanleyaccess.com • 1.800.7.ACCESS
Copyright 2019, Stanley Access Technologies, LLC. All rights reserved. Reproduction
in whole or in part without the express written permission of Stanley is prohibited.
10.18.2019
Attachment 4
Monitored Sensors Wiring Diagrams
(Sheet 2 of 14)
OHP1
DMS2
DMA2
DMA1
DMS1
SU100
SU100
*See NOTES 1 & 2
NOTES:
1. Oponal SU100 for two-way trac.
2. If the oponal SU100 for two-way trac is needed, this addional SU100 requires adding
a 24VDC external power supply into TB4-1 and TB4-2 and removing the 15V power jumpers
from TB7 and TB4 (see Aachment 5 sheet 3).