Stanley 204143 - Attachment 5: Non-Monitored Sensors Wiring Diagrams (Sheet 3 of 3)

iQ Control Box
10.18.2019
1.800.7.ACCESS • www.stanleyaccess.com • Document # 204143 REV 5 39
Copyright 2019, Stanley Access Technologies, LLC. All rights reserved. Reproduction
in whole or in part without the express written permission of Stanley is prohibited.
Attachment 5
Non-Monitored Sensors Wiring Diagrams
(Sheet 3 of 3)
NOTE: This wiring is for exisng installaons where monitoring is NOT required.
OHP1
DMS2
DMS1
OHP2
*SU100
*SU100
*NOTE: If DMA1 and DMA2 meet the requirements of ANSI
A156.10 secon 8.2.2.3, the SU100 sensors are not required.
DMA2
DMA1