Stanley OmniLock - Mortise Cases by Function and Option; Mortise Case Assembly

Mortise Components
Stanley OMNILOCK Illustrated Parts Catalog 3–5
MORTISE CASES BY FUNCTION AND OPTION
Mortise case
assemblies
Refer to the tables below to find the case assembly you need.
Figure 3.4 Mortise case assembly
Part Number
Sensor Option
DV
Function
a
a. All mortise case assemblies include two A18724 case mounting screws
(#12–12 × 3/4″ Phillips flat head).
TV
Function
a
None C45741 C45743
Key override switch C44639 C44638
Request-to-exit switch
b
b. Available for WAMS Mortise Locks only.
C44649 C44641
Key override switch and request-to-exit switch
b
— C44640
Key override switch, request-to-exit switch, and
door status switch
b
C44644 —
Key override switch, request-to-exit switch, door status
switch, and latch status switch
b
C44642 —
Request-to-exit switch, door status switch, and
latch status switch
b
C44643 —
Request-to-exit switch and door status switch
b
C44649 —