A§§EMBLY
AND
!!iETUP
CHAPTER
i!
This chapter details how to assemble and set up your
§TAR
TRAC
3900
TREADMILL.
Please begin
by
verifying that the following parts were included in your shipment:
Description Qty.
Frame Assembly 1
Motor Shroud 1
Front Handrail with Display Control Panel Attached 1
Side Handrails 2
Bolt, Hex Head, 5/16-18 UNC
x 6" 2
Washer, Flat, 5/16, Standard 2
Washer, Flat, 3/16 ID
x 1-3/8 OD 2
Screw, Button Head Socket Cap, 1/4"-28 UNF x 3/8"
* 8
Hex (Allen) key,
5/64"t
1
Hex (Allen) key,
1/8"t
1
Hex (Allen) key,
5/32"t
1
Hex (Allen) key,
1/4"t
1
Bungee cord
28"t
1
Screwdriver, Phillips,
#2t
1
Screwdriver, Flat Blade,
3/32"t
1
Wrench, Combo, 9/16"
&
7/8"t
1
Relubrication wax
packett
1
Rewax proceduret 1
Teaspoon, plastict 1
Owner's Manual with Warranty Registration Card 1
Should any component not be present or
if
you have any operational questions, please call Star
Trac's Service Hotline at (800) 503-1221. Specifically refer to your treadmill serial number and
model number listed below:
Serial No. _
Model No _
*Pre-inserted into handrails and connecting tubes (stubs)
tPart
of
included!iTAR
TRAC
3900
TREADMILL
tool kit.
§TAR
TRAC
3900
TREADMILL
Owner's
Manual
i!I
To Next Page
Loading...
