EasyManua.ls Logo

STARCUS F35 - General Safety Information; Intended Use; Safety Precautions; Safety Device Installation

STARCUS F35
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
45

The drive designed for automating industrial sectional doors.
The safe operation of the drive is only guaranteed when properly selected and instal-
led in accordance with this installation and user manual.
The drive with IP 54 enclosure must be protected against rain, excessive moisture and
other adverse environmental conditions. The manufacturer is not liable for any dama-
ge caused by a dierent use of the device or failure to follow the instructions below.
Modications to the device are allowed only with the prior consent of the manufactu-
rer.
Otherwise, the Manufacturer's Declaration is null and void.

Installation and commissioning may only be performed by qualied personnel.
Only trained and licensed installers may work on electrical devices. They must be able
to properly assess the tasks entrusted to them, inspect the place of installation of
the device and introduce appropriate safety measures. Any installation work must be
carried out with power o. The applicable laws and standards must be observed.
WARNING: Important safety instructions:
- All the instructions must be observed for the safety of people. Keep the manuals for
further use.
- Do not let children play with the device or controls, including the remote control.
- Follow all the instructions. Improper installation can lead to serious injuries.
- The operator control buttons must be installed in the way allowing for the direct
adjustments of the operation, but away from moving parts. If the drive is not activa-
ted with the key, the buttons (of the control unit) must be placed at a minimum height
of 1.5 m.
After completing the installation, make sure that the functions of the drive are proper-
ly set up and all safety devices and additional drivers are working properly.

The device may only be operated with drive/control panel covers and required safety
devices installed.
Ensure the correct tting of the gaskets and the proper tightening of the cable glands.

Note:
The measurements do not include the noise level emitted by the structure of the door
itself.
GENERAL SAFETY INFORMATION

Table of Contents