26
Editing
Editing Programs
The Program Page
The top section of the Program page serves for loading and setting up up to four
layers for a program. It contains the following parameters:
On
The On button is used to turn layers on or off. When switched off, layers do not use
any processing power. They are still loaded but do not receive MIDI anymore.
Mute
Activate the Mute button to silence a layer. The layer remains loaded and continues to
be processed. Therefore, it can be unmuted smoothly at any time.
Solo
Activate the Solo button in order to hear only the corresponding layer. You can also
activate multiple Solo buttons.
Ö At the top right of the Edit display, next to the name of the currently loaded program or
layer, additional global Mute and Solo buttons are available. With the Program page
opened, the buttons refer to the program. With one of the Layer pages opened, use
these to mute or solo the selected layer without switching to the Program page.
FlexPhraser
This button activates the FlexPhraser of a layer. You find the FlexPhraser editor on the
corresponding layer editor page.
Ö This button is only available for layers that support the FlexPhraser functionality.
Layer Slots
Here you can load up to four layers for a program. The loading of the layers
corresponds to the loading of programs into the slots of the Multi Program Rack, see
“Loading Programs” on page 15. You can rename a layer in the same way as a
program. Furthermore, the layers slots provide a layer context menu with the following
options:
Level
Here you can adjust the loudness of the layer.
Pan
Here you can set the position of the layer in the stereo panorama.
Option Description
Load Layer This option opens the Load Layer dialog. Select a layer and click
OK to load it into this slot.
Save Layer This option saves the layer in this slot with the current settings,
under the same name.
For write-protected content, the Save Layer dialog opens, in which
you can save the edited layer under a new name.
Save Layer As… This option opens the Save Layer dialog in which you can save the
edited layer under a new name.
Remove Layer Select this option to remove the layer from this slot.
Init Layer Select this option to load a neutral synth layer.
Copy Layer This option copies the layer that is loaded into the slot.
Paste Layer This option pastes the copied layer into the current slot.
To Next Page
Loading...