62
Editing
Editing Layers
The following destination is only available for sample layers:
Filter Env Attack
Time
Modulates the time of the filter envelope attack (the first segment of
the envelope). The attack time cannot be modulated continuously.
The time updates only when the segment starts.
Filter Env Decay
Time
Modulates the time of the filter envelope decay (all segments after the
attack and before the sustain). The decay time cannot be modulated
continuously. The time updates only when the segment starts.
Filter Env Sustain
Level
Modulates the level of the filter envelope sustain. The sustain level
cannot be modulated continuously. The level updates only when the
segment starts.
Filter Env Release
Time
Modulates the time of the filter envelope release (all segments after
the sustain). The release time cannot be modulated continuously. The
time updates only when the segment starts.
Pitch Env Attack
Time
Modulates the time of the pitch envelope attack (the first segment of
the envelope). The attack time cannot be modulated continuously.
The time updates only when the segment starts.
Pitch Env Decay
Time
Modulates the time of the pitch envelope decay (all segments after
the attack and before the sustain). The decay time cannot be
modulated continuously. The time updates only when the segment
starts.
Pitch Env Sustain
Level
Modulates the level of the pitch envelope sustain. The sustain level
cannot be modulated continuously. The level updates only when the
segment starts.
Pitch Env Release
Time
Modulates the time of the pitch envelope release (all segments after
the sustain). The release time cannot be modulated continuously. The
time updates only when the segment starts.
User Env Attack
Time
Modulates the time of the user envelope attack (the first segment of
the envelope). The attack time cannot be modulated continuously.
The time updates only when the segment starts.
User Env Decay
Time
Modulates the time of the user envelope decay (all segments after the
attack and before the sustain). The decay time cannot be modulated
continuously. The time updates only when the segment starts.
User Env Sustain
Level
Modulates the level of the user envelope sustain. The sustain level
cannot be modulated continuously. The level updates only when the
segment starts.
User Env Release
Time
Modulates the time of the user envelope release (all segments after
the sustain). The release time cannot be modulated continuously. The
time updates only when the segment starts.
Bus 1-16 You can send any modulation to one of the sixteen busses, for
example, to produce more complex modulation signals. Select the
bus you want to send the signals to as a destination. To use the
modulation that was sent to a bus, assign the corresponding bus as a
modulation source.
Option Description
Sample Start Modulates the starting position of the sample playback. For example,
assign note-on velocity to play back more of the attack of a sample
the harder you hit a note. The sample start cannot be modulated
continuously. The parameter updates only when you hit a note.
Option Description
To Next Page
Loading...